3D printing project – video 5 : issues

Hello everyone,

I am going to explain to you the issues we encountered during our project and the things we would do differently if we did it again. Our project consists of testing the tensile properties of 3D printed PLA with different parameters.

We encountered several problems. Firstly, we had a calibration problem on the first tests. Secondly, we had a problem with some tests where the specimens were too fragile. In addition, we had to change printers during the year because of the Covid 19. And the last problem was due to the age of the machine.

I hope you will enjoy this short video.

Have a nice day.

Bye.